Gerry's stuff
  • Gerry's web page
  • My 'Stimpy' project
    • Hardware elements
    • Cables and sleeving >
      • Final sleeving
    • Modding the power supply
    • Adding vinyl foil
    • Case lighting (new!)
    • System upgrades >
      • GA-880GA-UD3H systemboard
      • Corsair H50 water cooler installation
      • Floppy support is lacking!
      • Changing heatsinks
      • Stimpy gets a face change
      • Power supply upgrade
      • Liitle things
    • YASBU - Yet Another System Board Upgrade!
    • A Nerds life before Stimpy
  • Bike
    • Adding a front derailleur
    • Bike wheels
    • Bicycle Apps
  • Oasis/Odyssey Minivan
    • Odyssey Minivan
    • Sliding Door roller repair
    • Sliding Door replacement
  • Blog
  • testing new standard Blog
  • testing new Disqus Blog

Putting a CCFL lamp inside the power supply!

Picture
(Stimpy did get a big charge out of doing this!)

Kids-
don't ever do this!

We all know that Stimpy is an eediot, but a power supply should never be opened. There are no user serviceable parts inside!

But I know what I'm doing for the following. Before opening the power supply, I first took the precaution of discharging the capacitors by having Stimpy apply his tongue across the leads before I did anything!
​And of course, I unplugged the power supply first before doing any of this!
​(You might note that Stimpy forgot to do that!)

​Here's a picture of my power supply with a round ccfl (cold cathode florescent lamp) mounted to the outside of my power supply.  There's a wire going behind the CPU fan, and running down across the board to the components that power the lamp.  Sure, I can hide the wire underneath the motherboard, but there's got to be a better way.

What if I put the wire and the components inside of the power supply?!

Picture
Here is the round ccfl (cold cathode florescent lamp) connected to the inverter, power cable and on/off switch.
Picture
To keep the components cool mounted inside the power supply, I removed the top portion of the inverter.
Picture
Picture
Picture

The plastic cover protects the delicate ccfl tube from damage.  By removing one side of the cover, I can mount the lamp flush to the fan opening and grill.

Picture
Inverter mounted to the case where it will not interfere with internal components, and wires are carefully routed. Testing, and the final result.
​

Picture
Look Ma, no wires!
Previous
Cables and sleeving
Next
Vinyl foil
Powered by Create your own unique website with customizable templates.
  • Gerry's web page
  • My 'Stimpy' project
    • Hardware elements
    • Cables and sleeving >
      • Final sleeving
    • Modding the power supply
    • Adding vinyl foil
    • Case lighting (new!)
    • System upgrades >
      • GA-880GA-UD3H systemboard
      • Corsair H50 water cooler installation
      • Floppy support is lacking!
      • Changing heatsinks
      • Stimpy gets a face change
      • Power supply upgrade
      • Liitle things
    • YASBU - Yet Another System Board Upgrade!
    • A Nerds life before Stimpy
  • Bike
    • Adding a front derailleur
    • Bike wheels
    • Bicycle Apps
  • Oasis/Odyssey Minivan
    • Odyssey Minivan
    • Sliding Door roller repair
    • Sliding Door replacement
  • Blog
  • testing new standard Blog
  • testing new Disqus Blog